|
|
(20 dazwischenliegende Versionen von 2 Benutzern werden nicht angezeigt) |
Zeile 1: |
Zeile 1: |
− | [[Kategorie:Accesspoint_beschreibungen|200]]
| + | {{Accesspoint Kartenposition|ap=1.200}} |
− | == Information ==
| + | |
| | | |
− | === bootloader ===
| + | {| {{Prettytable}} |
− | <pre style="background: black; color: lightgreen; width: 640px; overflow: auto; ">
| + | !width="130" align="left" | {{AP Button|ap=1.200}} |
− | +Ethernet eth0: MAC address 00:d0:12:01:39:09
| + | !align="left" | [http://192.168.1.200:8080/ Status] |
− | IP: 192.168.115.254/255.255.255.0, Gateway: 192.168.115.200
| + | |
− | Default server: 192.168.115.113, DNS server IP: 192.168.115.200
| + | |
− | | + | |
− | RedBoot(tm) bootstrap and debug environment [ROM]
| + | |
− | Red Hat certified release, version 1.92p1 - built 16:53:03, Mar 26 2004
| + | |
− | | + | |
− | Platform: GW2342 Development Platform (XScale)
| + | |
− | Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
| + | |
− | | + | |
− | RAM: 0x00000000-0x04000000, 0x0001f880-0x03fd1000 available
| + | |
− | FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each.
| + | |
− | RedBoot>
| + | |
− | </pre>
| + | |
− | | + | |
− | === fconfig ===
| + | |
− | <pre style="background: black; color: lightgreen; width: 640px; overflow: auto; ">
| + | |
− | RedBoot> fconfig -l
| + | |
− | Run script at boot: false
| + | |
− | Use BOOTP for network configuration: false
| + | |
− | Gateway IP address: 192.168.115.200
| + | |
− | Local IP address: 192.168.115.254
| + | |
− | Local IP address mask: 255.255.255.0
| + | |
− | Default server IP address: 192.168.115.113
| + | |
− | Console baud rate: 115200
| + | |
− | DNS server IP address: 192.168.115.200
| + | |
− | GDB connection port: 9000
| + | |
− | Force console for special debug messages: false
| + | |
− | Network debug at boot time: false
| + | |
− | Default network device: npe_eth0
| + | |
− | RedBoot>
| + | |
− | </pre>
| + | |
− | | + | |
− | === fis ===
| + | |
− | <pre style="background: black; color: lightgreen; width: 640px; overflow: auto; ">
| + | |
− | RedBoot> fis list
| + | |
− | Name FLASH addr Mem addr Length Entry point
| + | |
− | RedBoot 0x50000000 0x50000000 0x00040000 0x00000000
| + | |
− | RedBoot config 0x50FC0000 0x50FC0000 0x00001000 0x00000000
| + | |
− | FIS directory 0x50FE0000 0x50FE0000 0x00020000 0x00000000
| + | |
− | RedBoot>
| + | |
− | </pre>
| + | |
− | | + | |
− | === i2c === | + | |
− | hm, handbuch lügt wohl.
| + | |
− | <pre style="background: black; color: lightgreen; width: 640px; overflow: auto; ">
| + | |
− | root@OpenWrt:/# i2cdetect 0
| + | |
− | WARNING! This program can confuse your I2C bus, cause data loss and worse!
| + | |
− | I will probe file /dev/i2c-0.
| + | |
− | I will probe address range 0x03-0x77.
| + | |
− | Continue? [Y/n] Y
| + | |
− | 0 1 2 3 4 5 6 7 8 9 a b c d e f
| + | |
− | 00: -- -- -- -- -- -- -- -- -- -- -- -- --
| + | |
− | 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
| + | |
− | 20: -- -- -- -- -- -- -- -- UU -- -- -- -- -- -- --
| + | |
− | 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
| + | |
− | 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
| + | |
− | 50: 50 UU UU UU UU -- -- -- -- -- -- -- -- -- -- --
| + | |
− | 60: -- -- -- -- -- -- -- -- UU -- -- -- -- -- -- --
| + | |
− | 70: -- -- -- -- -- -- -- --
| + | |
− | root@OpenWrt:/#
| + | |
− | </pre>
| + | |
− | | + | |
− | {| {{prettytable}}
| + | |
− | !Addr
| + | |
− | !IC
| + | |
− | !Funktion
| + | |
| |- | | |- |
− | |0x28 | + | | '''Zuletzt gesehen''' |
− | |ad7418 | + | |<OnApLastSeen>1.200</OnApLastSeen> - <OnApStatus>1.200</OnApStatus> |
− | | Temp. / Versorgung
| + | |
| |- | | |- |
− | |0x50 | + | | '''Standort''' |
− | | 24C08 | + | | |
− | | EEPROM schreiben ?!?
| + | |
| |- | | |- |
− | |0x51 | + | | '''Antenne und Richtung''' |
− | | 24C08 | + | | |
− | | EEPROM lesen ?!?
| + | |
| |- | | |- |
− | |0x52 | + | | '''Montage''' |
− | | ??? | + | | |
− | | weiß noch nicht
| + | |
| |- | | |- |
− | |0x53 | + | | '''Typ / Hersteller''' |
− | | ??? | + | | |
− | | weiß noch nicht
| + | |
| |- | | |- |
− | |0x54 | + | | '''Koordinaten''' |
− | | ??? | + | | N54.115496 E12.150007 |
− | | weiß noch nicht | + | |} |
| + | |
| + | === Kontaktdaten === |
| + | {| {{Prettytable}} |
| + | !width="130" align="left"| '''Name''' |
| + | !align="left"| Christoph Kottke |
| |- | | |- |
− | |0x68 | + | | '''E-Mail''' |
− | |ds1672 | + | | christoph (pkt) kottke@gmx (pkt) de |
− | | Uhr
| + | |
| |} | | |} |
| | | |
− | == Messen == | + | === Link Qualität === |
− | prüfen ob der treiber geladen ist
| + | {{AP Graph|ap=1.200}} |
− | | + | |
− | <pre style="background: black; color: lightgreen; width: 640px; overflow: auto; ">
| + | |
− | | + | |
− | root@OpenWrt:/# dmesg | grep -i ad7418
| + | |
− | ad7418 0-0028: ad7418 chip found
| + | |
− | ad7418 0-0028: configuring for mode 1
| + | |
− | root@OpenWrt:/#
| + | |
− | </pre>
| + | |
− | | + | |
− | === Temperatur ===
| + | |
− | <pre style="background: black; color: lightgreen; width: 640px; overflow: auto; ">
| + | |
− | root@OpenWrt:/# cat /sys/bus/i2c/devices/0-0028/temp1_input
| + | |
− | 37000
| + | |
− | root@OpenWrt:/#
| + | |
− | </pre>
| + | |
− | WERT / 1000 in °C (37000/1000 => 37,0 °C)
| + | |
− | | + | |
− | === Versorgungsspannung ===
| + | |
− | <pre style="background: black; color: lightgreen; width: 640px; overflow: auto; ">
| + | |
− | root@OpenWrt:/# cat /sys/bus/i2c/devices/0-0028/in1_input
| + | |
− | 583
| + | |
− | root@OpenWrt:/#
| + | |
− | </pre>
| + | |
− | (WERT / 1024) * 2,5(V max. Messbereich) * 10(Vorteiler) in V (583/1024)*2,5*10 => 14,23V
| + | |
− | | + | |
− | | + | |
− | == Nützliches ==
| + | |
− | | + | |
− | <pre style="background: black; color: lightgreen; width: 640px; overflow: auto; ">
| + | |
− | root@OpenWrt:~# echo heartbeat > /sys/devices/platform/leds-gpio/leds/user/trigger
| + | |
− | root@OpenWrt:~#
| + | |
− | </pre>
| + | |
| | | |
− | jetzt blinkt die LED "niedlich" und man weiß ob es dem teilchen gut geht.
| + | [[Kategorie:Accesspoint_beschreibungen|1.200]] |